DigiLock 110 Remote Control Interface Readme

Date: 2023-05-03

Package Version: 1.2.2

This file contains information about the DigiLock 110 Remote Control Interface software package developed by TOPTICA Photonics AG.

NOTE !

The DigiLock 110 RCI is a supplementary free add-on developed by TOPTICA Photonics AG on customer requests. However, due to the complexity of individual hard- and software configurations there is no support provided for the DigiLock 110 RCI.

Contents

System Requirements

Processor: x86 platform (e.g. Pentium III, 4, M), min. 800 MHz,

recommended > 1.2 GHz

RAM: min. 256 MB, recommended 512 MB

Operating System: Windows 7 SP1 32-/64-bit, Windows 8.1 32-/64-bit, Windows 10 32-/64-bit,

LabVIEW: Version 7.1 or newer

To view the user manual please install Adobe Acrobat Reader^®.

Changes

Version 1.2.2

· Manual updated.

Version 1.2.1

· Manual updated.

Version 935 (1.2.0)

· autolock:relock:output

· autolock:window

· pid<x>:window

Version 706

· Option in Scope-Set Channels.vi whether to set CH x or not

· Display-Set View.vi and Function-Set View.vi modified such that setting the current view again does not lead to an error message

Version 688 (1.1.1)

· Scope-Get Timescale.vi: timescale also available as double value

· Scope-Get Frequencyscale.vi: frequencyscale also available as double value

What’s New

Version 935 (1.2.0):

· autolock:input:treataslipdh

· autolock:lock:hold

· li/pdh:aio1outselection

· pid<x>:lock:hold

· pid<x>:hold:state

· pid<x>:regulating state

· pid<x>:relock:output

· response:modulation:input:overload

· response:modulation:output:overload

· simulation:includecontroller

· simulation:includeconverters

· simulation:includeinputfilter

· simulation:includelipdh

· spectrum:ch<x>:show dc

Version 688 (1.1.1)

· Speed of Remote Control Interface improved significantly (for functions handling arrays)

Known Issues

Bug Fixes

Bug-No.	Discovered in version	Description	Status
0001	682	Scope-Get Timescale.vi: command string was wrong	fixed
0002	688	Simulation-Set I Cut-off.vi and PID1-Set I Cut-off.vi did not work as expected	fixed
0003	688	Scope-Set Channels.vi: CH x was always set, regardless if the control is enabled or not. An error messag is issued if the control is not enabled	fixed
0004	688	PID-Get Lock Enable.vi, PID-Set Lock Enable.vi: wrong command is sent	fixed
0005	706	DigiLock-RemoteControl_Demo1.vi: wrong description in the box „How it works“	fixed